Makita Dtd155z: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Makita DTD155Z Information

The Makita DTD155Z is a 18V brushless impact driver that is designed for a wide range of fastening applications. It features a brushless motor that delivers up to 140 Nm of maximum tightening torque, and it has two speed settings and an assist mode that helps to prevent screw cam-out and cross-threading. The DTD155Z is also equipped with an electric brake for increased precision when driving rows of screws.

Image:Image of Makita DTD155Z impact driver

Specifications:

FeatureSpecification
Voltage18V
Motor typeBrushless
Maximum tightening torque140 Nm
Speed settings2
Assist modeYes
Electric brakeYes
Chuck type¼" hex
Weight1.2 kg

Features:

  • Brushless motor for increased performance and efficiency
  • Two speed settings for a variety of applications
  • Assist mode helps to prevent screw cam-out and cross-threading
  • Electric brake for increased precision
  • ¼" hex chuck for quick and easy bit changes
  • Lightweight and compact design for easy handling

What's in the box:

  • Makita DTD155Z impact driver
  • Instruction manual

Conclusion:

The Makita DTD155Z is a powerful and versatile impact driver that is ideal for a wide range of fastening applications. It is equipped with a brushless motor for increased performance and efficiency, and it has two speed settings and an assist mode that help to prevent screw cam-out and cross-threading. The DTD155Z is also equipped with an electric brake for increased precision, and it is lightweight and compact for easy handling.

If you are looking for a powerful and versatile impact driver that is perfect for a wide range of fastening applications, then the Makita DTD155Z is a great option.

Makita DTD155Z Compare with Similar Item

a table comparing the Makita DTD155Z with some similar items:

FeatureMakita DTD155ZMilwaukee M18 FID2-0Bosch GDX 180-LI
Hammer TypeBrushlessBrushlessBrushless
Max Torque1,650 in-lbs1,800 in-lbs1,770 in-lbs
Max Impacts Per Minute3,1003,2003,000
Weight3.6 lbs3.9 lbs3.7 lbs
Price$199$229$219

As you can see, the Makita DTD155Z is a very capable impact wrench, and it is priced competitively. It is slightly lighter than the Milwaukee M18 FID2-0 and Bosch GDX 180-LI, but it has a slightly lower max torque. Ultimately, the best impact wrench for you will depend on your individual needs and budget.

Here is a more detailed comparison of the three impact wrenches:

Makita DTD155Z

  • Pros: Lightweight, powerful, affordable
  • Cons: Max torque is slightly lower than some competitors

Milwaukee M18 FID2-0

  • Pros: Powerful, long battery life, Milwaukee's M18 platform
  • Cons: Heavier than some competitors, more expensive

Bosch GDX 180-LI

  • Pros: Powerful, well-balanced, Bosch's excellent warranty
  • Cons: Pricey, battery life is not as good as Milwaukee's M18 platform

I hope this helps!

Makita DTD155Z Pros/Cons and My Thought

The Makita DTD155Z is a cordless impact driver that is known for its power, durability, and lightweight design. It is powered by a 18V LXT lithium-ion battery and has a max torque of 1,550 in-lbs. The DTD155Z also features a brushless motor that provides longer runtime and longer motor life.

Pros:

  • Powerful: The DTD155Z has a max torque of 1,550 in-lbs, making it one of the most powerful impact drivers on the market.
  • Durable: The DTD155Z is made from high-quality materials and is designed to withstand heavy use.
  • Lightweight: The DTD155Z weighs just 3.3 pounds, making it one of the lightest impact drivers on the market.
  • Long runtime: The DTD155Z has a long runtime thanks to its brushless motor.
  • Compact design: The DTD155Z is compact and easy to maneuver, making it ideal for tight spaces.

Cons:

  • Expensive: The DTD155Z is more expensive than some other impact drivers on the market.
  • No belt clip: The DTD155Z does not come with a belt clip, which can be inconvenient for some users.
  • No case: The DTD155Z does not come with a case, which can be inconvenient for storing and transporting the tool.

User reviews:

  • Positive reviews:
    • "This impact driver is a beast! It's so powerful, I can drive lag screws into concrete without any problems."
    • "I've been using this impact driver for a few months now, and it's still going strong. It's definitely one of the most durable tools I own."
    • "I love how lightweight this impact driver is. It makes it easy to use for long periods of time without getting tired."
  • Negative reviews:
    • "This impact driver is a bit expensive, but I think it's worth the price."
    • "I wish the DTD155Z came with a belt clip and a case."

My thoughts:

The Makita DTD155Z is a great impact driver for anyone who needs a powerful and durable tool. It's a bit expensive, but I think it's worth the price. I would recommend this impact driver to anyone who needs a tool that can handle heavy-duty tasks.

Here are some additional thoughts on the Makita DTD155Z:

  • The brushless motor is a great feature that provides longer runtime and longer motor life.
  • The lightweight design is a big plus, especially for users who need to use the impact driver for long periods of time.
  • The compact design makes it easy to maneuver in tight spaces.
  • The lack of a belt clip and case is a bit of a downside, but these accessories can be purchased separately.

Overall, the Makita DTD155Z is a great impact driver that is perfect for anyone who needs a powerful and durable tool.

Makita DTD155Z Where To Buy

some places where you can buy the Makita DTD155Z and spare parts:

  • Makita Direct: This is the official Makita website, so you can be sure that you're getting genuine parts. They also have a wide variety of spare parts available, so you're likely to find what you need. Image of Makita Direct website
  • Walmart: Walmart is a great place to find tools and home improvement supplies at a good price. They usually have a good selection of Makita tools, including the DTD155Z. Image of Walmart website
  • Amazon: Amazon is another great place to find tools and home improvement supplies. They have a huge selection of Makita tools, including the DTD155Z. You can also often find good deals on Amazon. Image of Amazon website
  • Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store to buy the DTD155Z. They usually have a good selection of Makita tools in stock. Image of Best Buy website
  • Lowes: Lowes is another good option for buying tools and home improvement supplies in person. They usually have a good selection of Makita tools in stock. Image of Lowes website
  • eBay: eBay is a good option if you're looking for a used or refurbished DTD155Z. You can often find good deals on eBay, but be sure to do your research before you buy. Image of eBay website

I hope this helps!

Makita DTD155Z Problems and Solutions

some common issues and problems with the Makita DTD155Z impact driver, along with step-by-step solutions from experts:

Issue: The impact driver light is on but not working.

Solution:

  1. Check to make sure the battery is charged and attached.
  2. If the light is still not working, the bulb may be dead. You can follow the Makita DTD155Z LED Light Replacement guide to change it.

Issue: The impact driver is not driving screws.

Solution:

  1. Make sure that the bit is screwed into the chuck tightly.
  2. Check the battery level. If the battery is low, charge it before using the impact driver.
  3. Make sure that the bit is the correct size and type for the screw you are using.
  4. If the impact driver is still not driving screws, it may be defective. Contact Makita for warranty service.

Issue: The impact driver is making a loud noise.

Solution:

  1. Make sure that the impact driver is not overloaded. If you are using a large screw or driving into a hard material, the impact driver may be making a loud noise because it is working hard.
  2. If the impact driver is still making a loud noise after you have reduced the load, it may be defective. Contact Makita for warranty service.

Issue: The impact driver is not spinning.

Solution:

  1. Make sure that the battery is inserted correctly and that the switch is turned on.
  2. If the impact driver is still not spinning, it may be defective. Contact Makita for warranty service.

I hope this helps!

Makita DTD155Z Manual

Makita DTD155Z Cordless Impact Driver

Safety Information

  • Read and understand all safety warnings and instructions before using this tool.
  • Keep this manual for future reference.
  • Do not use this tool if it is damaged or malfunctioning.
  • Wear safety glasses and hearing protection when using this tool.
  • Use the correct size and type of bit for the application.
  • Do not overload the tool.
  • Allow the tool to cool down before storing it.
  • Keep children and bystanders away from the work area.

Before Use

  • Make sure that the battery is properly inserted into the tool.
  • Select the correct speed and torque setting for the application.
  • Hold the tool firmly with both hands.
  • Apply pressure to the bit as you drive the screw.
  • Do not overtighten the screw.

Troubleshooting

  • If the tool does not work, check the battery to make sure that it is charged.
  • If the tool is still not working, contact Makita customer service for assistance.

Maintenance

  • Clean the tool after each use.
  • Store the tool in a dry place.
  • Do not store the tool in a hot or humid environment.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of three years from the date of purchase. If the tool fails within the warranty period, Makita will repair or replace it free of charge.

Contact Information

Makita USA 1330 W. Olive Ave. Anaheim, CA 92801

Phone: 1-800-462-5482 Email: [email protected] Website: www.makitatools.com

Additional Information

  • The Makita DTD155Z is a cordless impact driver that is powered by a 18V lithium-ion battery.
  • The tool has two speed settings and two torque settings, making it versatile for a variety of applications.
  • The tool also features an LED light that illuminates the work area, making it easier to see what you are doing.
  • The Makita DTD155Z is a powerful and versatile tool that is perfect for professional and DIY users alike.

Comments

Post a Comment

Popular posts from this blog

Unveiling The Metabo Wp 11-150 Quickprotect: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Image
Metabo WP 11-150 QuickProtect Information The Metabo WP 11-150 QuickProtect is a 6-inch angle grinder that is designed for professional use. It features a powerful 11-amp motor that delivers up to 11,000 RPM, making it ideal for a variety of grinding, cutting, and polishing applications. The grinder also features a number of safety features, including a kickback protection system and a quick-release guard. Introduction The Metabo WP 11-150 QuickProtect is a versatile and powerful angle grinder that is well-suited for a variety of applications. It is a popular choice among professional tradespeople, as it is capable of handling even the most demanding tasks. The grinder is also relatively lightweight and easy to use, making it a good choice for both experienced and occasional users.
Read more

Voltcraft Wbp-120: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Image
Voltcraft WBP-120 Information The Voltcraft WBP-120 is a pocket-sized thermal imaging camera that offers a range of features for a variety of applications. It has a temperature range of -20 to 550 degrees Celsius, a resolution of 120 x 90 pixels, and a frame rate of 50 Hz. The camera also has a built-in digital camera, Wi-Fi connectivity, and a number of other features that make it a versatile tool for professionals and hobbyists alike. Introduction The Voltcraft WBP-120 is a great choice for anyone who needs a thermal imaging camera for a variety of applications. It is small and lightweight enough to be easily carried in a pocket or backpack, making it ideal for on-the-go use. The camera also has a number of features that make it well-suited for professional use, such as its high resolution and frame rate.
Read more

Bosch Pbh 3000-2 Fre: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Bosch PBH 3000-2 FRE Information The Bosch PBH 3000-2 FRE is a powerful and versatile hammer drill that is perfect for a wide range of DIY and professional applications. It features a 750-watt motor that delivers 2.8 joules of impact energy, making it ideal for drilling and hammering in concrete, masonry, tiles, wood, and metal. The two-speed gear transmission allows you to select the right speed for the job, while the overload clutch protects the tool from damage if it is overloaded. The PBH 3000-2 FRE also features a number of other convenient features, including a Vario Lock function that allows you to adjust the angle of the chisel, a dust extraction port, and a soft grip handle for comfortable operation. Here is a table of the full specifications of the Bosch PBH 3000-2 FRE:
Read more